Huawei OptiX OSN 9800 General Service Processing Board TNV6G230S01

Backplane capacity

The maximum capacity is 400 Gbit/s.

NOTE:

When the board works with the different system control and cross-connect Board, the maximum supported backplane capacity is different.

Client-side service type

SDH service:

• STM-1: SDH service at a rate of 155.52 Mbit/s
• STM-4: SDH service at a rate of 622.08 Mbit/s
• STM-16: SDH service at a rate of 2488.32 Mbit/s
• STM-64: SDH service at a rate of 9.95 Gbit/s

SONET service:

• OC-3: SONET service at a rate of 155.52 Mbit/s
• OC-12: SONET service at a rate of 622.08 Mbit/s
• OC-48: SONET service at a rate of 2488.32 Mbit/s
• OC-192: SONET service at a rate of 9.95 Gbit/s

Ethernet service:

• FE: Ethernet service at a rate of 125 Mbit/s. Supports FE optical signals.
• GE: Ethernet service at a rate of 1.25 Gbit/s. Supports GE optical signals and GE electrical signals.
• 10GE LAN: Ethernet service at a rate of 10.31 Gbit/s
• 10GE WAN: Ethernet service at a rate of 9.95 Gbit/s
• 25GE: Ethernet service at a rate of 25.78 Gbit/s

OTN service:

• OTU1: OTN service at a rate of 2.67 Gbit/s
• OTU2: OTN service at a rate of 10.71 Gbit/s
• OTU2e: OTN service at a rate of 11.1 Gbit/s

SAN service:

• FC100: SAN service at a rate of 1.06 Gbit/s
• FC200: SAN service at a rate of 2.12 Gbit/s
• FC400: SAN service at a rate of 4.25 Gbit/s
• FICON: SAN service at a rate of 1.06 Gbit/s
• FICON Express: SAN service at a rate of 2.12 Gbit/s
• FICON 4G: SAN service at a rate of 4.25 Gbit/s
• FC800: SAN service at a rate of 8.5 Gbit/s
• FICON 8G: SAN service at a rate of 8.5 Gbit/s
• FICON 10G: SAN service at a rate of 10.51 Gbit/s
• FC1200: SAN service at a rate of 10.51 Gbit/s
• FC1600: SAN service at a rate of 14.025 Gbit/s
• FC3200: SAN service at a rate of 28.05 Gbit/s
• ESCON: SAN service at a rate of 200 Mbit/s
• FDDI: SAN service at a rate of 125 Mbit/s

Video service:

• SDI: Serial digital interface at a rate of 270 Mbit/s
• HD-SDI: Bit-serial digital interface for high-definition television systems at a rate of 1.49 Gbit/s
• HD-SDIRBR: Bit-serial digital interface for high-definition television systems at a rate of 1.49/1.001 Gbit/s
• 3G-SDI: Video service at a rate of 2.97 Gbit/s
• 3G-SDIRBR: Video service at a rate of 2.97/1.001 Gbit/s
• DVB-ASI: Video service at a rate of 270 Mbit/s

Service mapping mode

• GE: GE(TTT-GMP), GE(GFP-T)

• 10GE LAN: Bit Transparent Mapping (11.1G), MAC Transparent Mapping (10.7G)

• 25GE: 25GE(BMP), 25GE (GFP-F)

FEC coding

Supports ITU-T G.709-compliant forward error correction (FEC) on the client side when the client-side service type is OTU1 or OTU2(e).

OTN overhead

• ODU0/ODU1/ODU2 layer: supports PM and TCM overhead processing, and non-intrusive monitoring of PM and TCM overheads.
• OTU1/OTU2 layer: supports SM overhead processing.
• ODUflex layer: supports PM overhead processing.

LPT

Supported on the client side when FE/GE/10GE LAN services are received.

NOTE:

The port equipped with an electrical module does not support LPT.

Client 1+1 protection

Supported

NOTE:

When OTU1 services are received on the client side, client 1+1 protection is only supported in ODU1 non-convergence mode.

ODUk SNCP

Supported

Tributary SNCP

Supported

NOTE:

• The board supports tributary SNCP protection only when the client-side service type is OTN, SDH, SONET or 10G WAN.
• When OTU1 services are received on the client side and the mapping path is OTU1->ODU1->ODU0, tributary SNCP protection at the ODU0 level is supported.

Electrical-layer ASON

Supported

L1 service encryption

Supported

NOTE:

When working in ODU1 convergence mode and ODU1_ODU0 mode, these boards do not support encryption.

ALS

Supported on the client side when non-OTN services are received.

NOTE:

The port equipped with an electrical module does not support ALS.

LLDP

Supported when Ethernet services are received on the client side.

NOTE:

• The LLDP function is not supported when 10GE WAN/GE/FE services are received on the client side.
• When the service mapping mode is MAC transparent mapping, the port LLDP mode is the receive mode by default. In this case, LLDP packets are not transparently transmitted.

Physical clock

• GE(TTT-GMP), 10GE LAN(Bit Transparent Mapping(11.1G)), 25GE(BMP): Supports synchronous Ethernet transparent transmission

• GE(GFP-T), 10GE LAN(MAC transparent mapping(10.7G)), 25GE(GFP-F): Supports synchronous Ethernet processing

IEEE 1588v2

When GE (GFP-T), 25GE (GFP-F), or 10GE LAN(MAC transparent mapping(10.7G)) services are received on the client side, the TC, TC+OC, BC, and OC modes are supported.

NOTE:

• The port equipped with an electrical module does not support IEEE 1588v2.
• Only ports 1 to 15 support IEEE 1588v2.

ITU-T G.8275.1

Supported when GE (GFP-T), 25GE (GFP-F), or 10GE LAN(MAC transparent mapping(10.7G)) services are received on the client side.

NOTE:

• The port equipped with an electrical module does not support ITU-T G.8275.1.
• Only ports 1 to 15 support ITU-T G.8275.1.

ITU-T G.8273.2

Supported

NOTE:

• The board does not support ITU-T G.8273.2 when the system control board is U2CTU.
• The port equipped with an electrical module does not support ITU-T G.8273.2.
• Only ports 1 to 15 support ITU-T G.8273.2.

High-precision clock synchronization

Supported

NOTE:

• Supported when GE (GFP-T), 25GE (GFP-F), or 10GE LAN(MAC transparent mapping(10.7G)) services are received on the client side.
• The high-precision clock synchronization function can be implemented only after the corresponding license is obtained.
• The board must work with the subrack and system control board that support high-precision clock to support the high-precision clock synchronization function. For details, see Clock Synchronization Feature Guide.
• The port equipped with an electrical module does not support High-precision clock synchronization.
• Only 1 to 15 ports support High-precision clock synchronization.

Outband DCN

Supported communication over ESCs when the client-side service type is OTU1/OTU2/OTU2e.

Test frame

Supports this function when receiving GE (GFP-T)/10GE LAN(MAC transparent mapping(10.7G))/25GE (GFP-F) services on the client side.

NOTE:

The board supports this function only in ODU1 convergence mode when receiving FE services on the client side.

PRBS

The PRBS function in the optical port direction is supported only when the client-side service type is STM-1, OC–3, STM-4, OC-12, STM-16, OC-48, OTU1, STM-64, OC-192, OTU2 or OTU2e.

NOTE:

When working in ODU1_ODU0 mode, the board does not support the PRBS test function in the backplane direction.

Latency measurement

• When non-OTN services are received on the client side of the board, the PM section latency measurement is supported in the backplane direction (upstream direction).
• When OTN services are received on the client side of the board, the TCM section latency measurement is supported in the optical port direction (downstream direction).

Port loopback

• Supports inloops and outloops on the client side.
• Supports ODUk inloops and ODUk outloops on the client side.

NOTE:

• When the board works in ODU1 convergence mode, you must configure intra-board cross-connections before loopbacks. Otherwise, the loopbacks become abnormal.
• The board supports ODUk inloop and ODUk outloop only when non-OTN services are received, the port working mode is non-convergence, and bidirectional cross-connections are configured.
• When the service type is set to None, Inloop, Outloop, and ODUk Outloop are not supported.
• When non-OTN services are received, the PRBS in the backplane direction can be used only with ODUk loopback.

Alarm and performance event monitoring

• Supports the monitoring of BIP8 bytes (Bursty mode) to help locate line faults.
• Supports the monitoring of B1 bytes to help locate line faults.
• Supports the monitoring of OTN alarms and performance events.
• Supports the monitoring of the laser bias current.
• Supports the laser temperature monitoring.
• Supports the optical power monitoring.
• Supports the remote monitoring (RMON) of Ethernet services.