TNV4S216 Is Huawei OptiXtrans E9600 SDH Board
Huawei OptiXtrans E9600 SDH Board TNV4S216 Overview
TNV4S216: 16 x STM-N(N=1, 4, 16), 8 x STM-64, aggregate capacity <= 80G optical interface board
The S216 board converts the received STM-n optical signals into VC4, VC-4-Xc (X=4/16/64) signals and sends VC4, VC-4-Xc (X=4/16/64) signals to the cross-connect side.
The S216 board supports OTU1 services.
Ports on a TNV4S216 board are classified into two groups: TX1/RX1 to TX8/RX8 and TX9/RX9 to TX16/RX16. The maximum SDH capacity of each group of ports is 40 Gbit/s.
Functions and Features of the TNV4S216 Board
Function and Feature |
Description |
Basic function |
The maximum SDH capacity is 2 x 40 Gbit/s. 2 x 8 x STM-n (n = 1, 4, or 16)/2 x 4 x STM-64 optical signals OTU1->ODU1->STM16->VC-4 NOTE:
|
Backplane capacity |
The total backplane bandwidth is 2*40 Gbit/s. |
Service processing |
VC-12, VC-3, VC-4, VC-4-4c, VC-4-16c, VC-4-64c |
Overhead processing |
NOTE: Deleting the logical port that accesses STM-n (n = 1, 4, 16, 64) services will interrupt DCN communication at this port. |
SDH SNCP |
Supported |
Linear MSP |
Supports |
Ring MSP |
|
SDH ASON |
Supported |
ALS |
Supported |
Physical clock |
Supports SDH clock synchronization. |
Outband DCN |
Supported |
PRBS |
Supported |
Channel loopback |
Supports loopbacks on VC paths. |
Port loopback |
Inloops, outloops |
2M ASON |
Supported NOTE: Only supported when the E9624 is used. |
Alarm and performance event monitoring |
Provides various alarms and performance events, facilitating equipment management and maintenance. |