TNV2SXCL Is Huawei OptiX OSN 9800 Low Order Universal Cross-Connect Board
Huawei OptiX OSN 9800 Low Order Universal Cross-Connect Board TNV2SXCL Overview
TNV2SXCL: 160G VC3/VC12 Low Order Universal Cross-Connect Board
There are four indicators on the front panel of the SXCL board.
An SXCL board is a cross-connect board that implements VC-3 and VC-12 signal grooming and protection in a subrack.
The SXCL board consists of a cross-connect module, control and communication module, and power supply module.
Functions and Features of the TNV2SXCL Board
Function and Feature |
Description |
Basic function |
Performs centralized grooming of VC-3/VC-12 signals in a subrack. |
Cross-connect Capacity |
Cross-connects a maximum of 160 Gbit/s VC-3/VC-12 signals. |
OTN cluster |
Not Supported |
Electrical-layer ASON |
Supported |
SDH ASON |
Supported |
Backup mode |
1+1 backup. |
Switching mode |
Automatic switching, manual switching, and forced switching by pressing the active switching button or turning on micro switches are supported. Non-revertive switching is supported. NOTE: When a board works in active state, do not perform a cold reset on the board. Do not remove a board in active state. You must switch the board to the standby state before removing it. You can use Manual Switching on the NMS to configure the board as the standby board or press the active switching button or turn on the micro switches on the front panel to switch the board to the standby state. |