Huawei OptiXtrans E9600 12 Port 10G OTN Tributary Service Processing Board TNG3T212

Backplane capacity

The maximum capacity is 200 Gbit/s.

Client-side service type

SDH service:

• STM-1: SDH service at a rate of 155.52 Mbit/s
• STM-4: SDH service at a rate of 622.08 Mbit/s
• STM-16: SDH service at a rate of 2488.32 Mbit/s
• STM-64: SDH service at a rate of 9.95 Gbit/s

SONET service:

• OC-3: SONET service at a rate of 155.52 Mbit/s
• OC-12: SONET service at a rate of 622.08 Mbit/s
• OC-48: SONET service at a rate of 2488.32 Mbit/s
• OC-192: SONET service at a rate of 9.95 Gbit/s

Ethernet service:

• FE: Ethernet service at a rate of 125 Mbit/s. The board supports FE optical signals.
• GE: Ethernet service at a rate of 1.25 Gbit/s. The board supports GE optical or electrical signals.
• 10GE LAN: Ethernet service at a rate of 10.31 Gbit/s
• 10GE WAN: Ethernet service at a rate of 9.95 Gbit/s
• 25GE: Ethernet service at a rate of 25.78 Gbit/s

OTN service:

• OTU1: OTN service at a rate of 2.67 Gbit/s
• OTU2: OTN service at a rate of 10.71 Gbit/s
• OTU2e: OTN service at a rate of 11.1 Gbit/s

SAN service:

• FC100: SAN service at a rate of 1.06 Gbit/s
• FC200: SAN service at a rate of 2.12 Gbit/s
• FC400: SAN service at a rate of 4.25 Gbit/s
• FICON: SAN service at a rate of 1.06 Gbit/s
• FICON Express: SAN service at a rate of 2.12 Gbit/s
• FICON 4G: SAN service at a rate of 4.25 Gbit/s
• FC800: SAN service at a rate of 8.5 Gbit/s
• FICON 8G: SAN service at a rate of 8.5 Gbit/s
• FICON 10G: SAN service at a rate of 10.51 Gbit/s
• FC1200: SAN service at a rate of 10.51 Gbit/s
• FC1600: SAN service at a rate of 14.025 Gbit/s
• FC3200: SAN service at a rate of 28.05 Gbit/s
• ESCON: SAN service at a rate of 200 Mbit/s
• FDDI: SAN service at a rate of 125 Mbit/s

Video service:

• SDI: Serial digital interface at a rate of 270 Mbit/s
• HD-SDI: Bit-serial digital interface for high-definition television systems at a rate of 1.49 Gbit/s
• HD-SDIRBR: Bit-serial digital interface for high-definition television systems at a rate of 1.49/1.001 Gbit/s
• 3G-SDI: Video service at a rate of 2.97 Gbit/s
• 3G-SDIRBR: Video service at a rate of 2.97/1.001 Gbit/s
• DVB-ASI: Video service at a rate of 270 Mbit/s

Service mapping mode

• GE: GE (TTT-GMP), GE (GFP-T)
• 10GE LAN: Bit Transparent Mapping (11.1G), MAC Transparent Mapping (10.7G)
• 25GE: 25GE (BMP), 25GE (GFP-F)

FEC coding

• Supports FEC coding when OTU1/OTU2/OTU2e services are received.
• Supports RSFEC coding when 25GE/FC3200 services are received.

OTN overhead

• ODUflex layer: Supports PM overhead processing.
• ODU0/ODU1/ODU2 layer: Supports PM and TCM overhead processing and non-intrusive monitoring of PM and TCM overheads.
• OTU1/OTU2 layer: Supports SM overhead processing.

Maximum frame length for a port

1518 to 9600 bytes. That is, the maximum size of the supported Jumbo frame is 9600 bytes.

LPT

Supported

NOTE:

• This function is supported when FE/GE/10GE LAN services are received on the client side.
• This function is not supported when the port is equipped with an electrical module.

Client 1+1 protection

Supported

NOTE:

When OTU1 services are received on the client side, client 1+1 protection is only supported in ODU1 non-convergence mode.

ODUk SNCP

Supported

Tributary SNCP

Supported

NOTE:

• The board supports tributary SNCP protection only when the client-side service type is OTN, SDH, SONET or 10G WAN.
• When OTU1 services are received on the client side and the mapping path is OTU1->ODU1->ODU0, tributary SNCP protection at the ODU0 level is supported.

Electrical-layer ASON

Supported

L1 service encryption

Supports setting the encryption function by port.

NOTE:

When working in ODU1 convergence mode and ODU1_ODU0 mode, the board does not support the encryption function.

ALS

Supported when client services are non-OTN services

NOTE:

The port equipped with an electrical module does not support ALS.

LLDP

Supported when Ethernet services are received on the client side

NOTE:

• This function is not supported when 10GE WAN, GE, or FE services are received on the client side.
• When the service mapping mode is MAC transparent mapping, the port LLDP mode is receive mode by default. In this case, LLDP packets are not transparently transmitted.

Physical clock

• When GE (TTT-GMP)/10GE LAN (Bit Transparent Mapping (11.1G))/25GE (BMP) services are received on the client side, synchronous Ethernet transparent transmission is supported.
• When GE (GFP-T)/10GE LAN (MAC transparent mapping (10.7G))/25GE (GFP-F) services are received on the client side, synchronous Ethernet processing is supported.

IEEE 1588v2

• Supported when GE (GFP-T) or 25GE (GFP-F) services are received on the client side
• Supported when 10GE LAN services are received on the client side and Port Mapping is set to MAC Transparent Mapping (10.7G)

NOTE:

The port equipped with an electrical module does not support IEEE 1588v2.

ITU-T G.8275.1

• Supported when GE (GFP-T) or 25GE (GFP-F) services are received on the client side
• Supported when 10GE LAN services are received on the client side and Port Mapping is set to MAC Transparent Mapping (10.7G)

NOTE:

This function is not supported when the port is equipped with an electrical module.

ITU-T G.8273.2

Supported

NOTE:

This function is not supported when the port is equipped with an electrical module.

High-precision clock synchronization

Supported

NOTE:

• This function is supported when GE (GFP-T), 25GE (GFP-F), or 10GE LAN (MAC transparent mapping (10.7G)) services are received on the client side.
• The NE can implement high-precision time synchronization only after the corresponding license is obtained.
• To support high-precision clock synchronization, the board must work with the subracks and system control boards that support high-precision clocks. For details, see the Clock Synchronization Feature Guide.
• This function is not supported when the port is equipped with an electrical module.

Outband DCN

Supports ESC communication when the client-side service type is OTU1/OTU2/OTU2e.

Test frame

Supported when the client-side service type is FE/GE (GFP-T)/10GE LAN (MAC Transparent Mapping (10.7G))/25GE (GFP-F)

NOTE:

This function is supported only in ODU1 convergence mode when FE services are received on the client side.

PRBS

Supports the PRBS function in the optical port direction when STM-1/OC-3, STM-4/OC-12, STM-16/OC-48, STM-64/OC-192, OUT1, OTU2, or OU2e services are received on the client side.

NOTE:

When working in ODU1_ODU0 mode, the board does not support the PRBS function in the backplane direction.

Latency measurement

• When non-OTN services are received on the client side, PM latency measurement is supported in the backplane direction (upstream direction).
• When OTN services are received on the client side, TCM latency measurement is supported in the optical port direction (downstream direction).

Channel loopback

Supports channel inloops and outloops.

NOTE:

ODU0 channel loopbacks are supported only when the port working mode is ODU1_ODU0.

Port loopback

• Supports inloops and outloops on the client side.
• Supports ODUk inloops and outloops on the client side.

NOTE:

• When the board works in ODU1 convergence mode, you must configure intra-board cross-connections before performing loopbacks. Otherwise, the loopbacks become abnormal.
• The board supports ODUk inloops and outloops only when non-OTN services are received, the port working mode is non-convergence, and bidirectional cross-connections are configured.
• When the service type is set to None, setting inloops, outloops, and ODUk outloops is not supported.
• When non-OTN services are received, the PRBS in the backplane direction can be used only with ODUk loopbacks.

Alarm and performance event monitoring

• Monitors BIP8 bytes (Bursty mode) to facilitate line fault locating.
• Monitors B1 bytes to facilitate line fault locating.
• Monitors OTN alarms and performance events.
• Monitors the laser bias current, laser operating temperature, and optical power.
• Supports the Ethernet RMON monitoring function.