Huawei OptiX OSN 9800 Optical Transponder Unit TNG1M804SMT77

Basic function

The board can convert client-side services into OTU signals,the client-side service supports hybrid transmission of different services, for details about the service types, number of channels, and mapping paths supported by different ports, see Applications.

Client-side service type

• OTU4: OTN service at a rate of 111.81 Gbit/s
• 100GE: Ethernet service at a rate of 103.125 Gbit/s
• 400GE: Ethernet service at a rate of 425 Gbit/s
• 100G FlexE unaware: Flexible ethernet services at a rate of 103.125 Gbit/s

NOTE:

A FlexE Group can be bound to only one Ethernet PHY.

Service mapping mode

• 100GE service: Supports Bit Transparent Mapping ODU4, MAC Transparent Mapping ODU4, MACB2B mapping.
• 400GE service: Supports Bit Transparent Mapping(BMP), MACB2B mapping.
• FlexE 100G unaware service: Supports Bit Transparent Mapping ODU4, Bit Transparent Mapping(BMP) mapping.

WDM specification

Supports the DWDM specifications.

Tunable wavelength

TNG1M804SM supports tunable wavelengths of WDM-side optical signals in Super C band (1524 nm to 1573 nm).

FEC coding

• Client side: Supports FEC coding when the client-side service type is OTU4.
• Client side: Supports RS_FEC coding when the client-side service type are ethernet services, FlexE services.
• WDM side: Supports SDFEC3 coding.

Line modulation format

• 400G s16QAM
• 600G 16QAM
• 800G e64QAM

Typical channel spacing

400G s16QAM/600G 16QAM/800G e64QAM: 100GHz+n*6.25GHz(n=0,1,2...)

NOTE:

Due to high filtering penalty, the preceding modulation formats cannot be used with 100G optical-layer boards with fixed channel spacing, such as the TNG2D60 and TNG2M60.

OTN overhead

• ODUflex/ODUCn (n = 4, 6, 8) layer: supports PM and TCM overhead processing.
• ODU4 layer:
  • Supports PM and TCM overhead processing when 100GE services are received on the client side.
  • Supports PM and TCM overhead processing when OTU4 services are received on the client side. This board supports non-intrusive monitoring of PM and TCM overheads.
  • Supports SM overhead processing at the OTU4 layer on the client side.
• OTUCn (n = 4, 6, 8) layer: supports SM overhead processing.

LPT

Not supported

Intra-board 1+1 protection

Supported

NOTE:

• Supports intra-board 1+1 protection when working with optical protection boards.

Client 1+1 protection

Supported

NOTE:

• Client 1+1 protection is supported only when 100GE/OTU4 ports are used.
• When 100GE services are received on the client side, client 1+1 protection supports bidirectional switching rather than unidirectional switching. When OTU4 services are received on the client side, client 1+1 protection supports unidirectional switching.

ODUk SNCP

Not supported

Tributary SNCP

Not supported

Optical-layer ASON

Supported

NOTE:

Supported when the line rate is OTUCn (n = 4, 6).

L1 service encryption

Supports setting the encryption function by port.

NOTE:

• After the encryption function is configured, the WDM-side rate of the board cannot be switched, but the modulation formats of the same rate can be switched.
• Supported when ethernet services or FlexE services are accessed.

Digital optical label

When LS Ability is enabled, the board supports loading low-frequency pilot-tone modulation signals and overheads during wavelength conversion, and can work the optical-layer board that supports the digital optical label function to detect optical power and overheads and report optical performance data.

ALS

Supports the ALS function on the client side when client services are non-OTN services.

LLDP

Supports the LLDP function when the client-side service is ethernet.

NOTE:

• The board does not support LLDP when receiving FlexE services.
• LLDP only supports RX and DISABLE modes.

Physical clock

Supports synchronous Ethernet processing:

• 100GE (MAC Transparent Mapping ODU4/MACB2B)
• 400GE (MACB2B)

Supports synchronous Ethernet transparent transmission:

• 100GE (Bit Transparent Mapping ODU4)
• 400GE (Bit Transparent Mapping(BMP))
• FlexE 100G unaware

IEEE 1588v2

Supported

NOTE:

Supported when Ethernet services are received on the client side and the mapping mode is GFP-F or MACB2B.

Supported when FlexE services are received on the client side.

ITU-T G.8275.1

Supported

NOTE:

Supported when Ethernet services are received on the client side and the mapping mode is GFP-F or MACB2B.

Supported when FlexE services are received on the client side.

ITU-T G.8273.2

Supported

NOTE:

Supported when Ethernet services are received on the client side and the mapping mode is GFP-F or MACB2B.

Supported when FlexE services are received on the client side.

Outband DCN

Supports ESC communication.

NOTE:

• The board supports a maximum of four ESCs.
• When the Dual-CS optical module receives services, only the first channel supports ESC communication.

Test frame

Supported when the client-side service type is 100GE or 400GE.

NOTE:

For Ethernet test frames, only one interface can be used to send them at a time.

PRBS

• Supports the PRBS function on the WDM side.
• PRBS signals can be sent from the client-side optical port to the WDM side only when the client-side service type is OTU4 and the board works in Muxponder mode.
• PRBS signals can be sent from the client-side optical port to the system side.

NOTE:

PRBS signals can not be sent from the client-side optical port to the system side, when the WDM-side rate is OTUC8.

Latency measurement

• Supports PM and TCM latency measurement for upstream higher-order ODU channels.
• Supports PM and TCM latency measurement for upstream lower-order ODU channels when non-OTN services are received on the client side.
• Supports TCM latency measurement for downstream lower-order ODU channels when OTN services are received on the client side.

NOTE:

• In a mapping path, the maximum granularity ODUk channel is the higher-order ODU channel, and other ODUk channels are lower-order ODUk channels.
• Latency measurement is not supported when the cross-connect granularity is TDUflex.

Channel loopback

Support channel inloop and outloop

NOTE:

Only ports that use dual-CS optical modules to access services support channel loopback.

Port loopback

• Supports inloops and outloops on the WDM side.
• Supports inloops and outloops on the client side.
• Supports ODUk inloops and ODUk outloops on the client side.
• Supports inloops and outloops in a FlexE group.

NOTE:

• Client-side ports that use Dual-CS optical modules to receive services do not support client-side loopback.
• When the WDM-side rate of the board is OTUC8, the ODUk loopback function is not supported.
• ODUk loopback and FlexE group loopback cannot be configured at the same time.
• If the client-side service rate of the same service is the same as that of the WDM-side service, the WDM-side optical interface loopback is not supported.

Alarm and performance event monitoring

• Supports the monitoring of BIP8 bytes (Bursty mode) to help locate line failures.
• Supports the monitoring of OTN alarms and performance events.
• Supports the remote monitoring (RMON) of Ethernet services.
• Supports the monitoring of the bias current of the laser.
• Supports the monitoring of the temperature of the laser.
• Supports the monitoring of the optical power.
• Supports the monitoring of CD and PMD performance.

Basic function

Electrically regenerates optical signals at an electrical REG station.

Regeneration mode

Unidirectional regeneration

Regeneration rate

• OTUC4
• OTUC6
• OTUC8

WDM specification

Supports the DWDM specifications.

Tunable wavelength

M804SM supports tunable wavelengths of WDM-side optical signals in Super C band (1524 nm to 1573 nm).

FEC coding

SDFEC3

Line modulation format

• 400G s16QAM
• 600G 16QAM
• 800G e64QAM

Typical channel spacing

400G s16QAM/600G 16QAM/800G e64QAM: 100GHz+n*6.25GHz(n=0,1,2...)

NOTE:

Due to high filtering penalty, the preceding modulation formats cannot be used with 100G optical-layer boards with fixed channel spacing, such as the TNG2D60 and TNG2M60.

OTN overhead

OTUCn (n = 4, 6, 8) layer: supports SM overhead processing.

Optical-layer ASON

Supported

NOTE:

Supported when the line rate is OTUCn (n = 4, 6).

ALS

Supported

Outband DCN

Supports ESC communication.

Alarm and performance event monitoring

• Monitors OTN alarms and performance events.
• Monitors parameters such as the bias current, temperature, and optical power of the laser.
• Supports CD and PMD performance monitoring.