Huawei OptiX OSN 9800 Optical Transponder Unit TNG1M210D

Basic function

The board can convert client-side services into OTU signals,the client-side service supports hybrid transmission of different services, for details about the service types, number of channels, and mapping paths supported by different ports, see Applications.

Client-side service type

• STM-1: SDH service at a rate of 155.52 Mbit/s
• STM-4: SDH service at a rate of 622.08 Mbit/s
• STM-16: SDH service at a rate of 2488.32 Mbit/s
• STM-64: SDH/SONET service at a rate of 9.95 Gbit/s
• OC-3: SONET service at a rate of 155.52 Mbit/s
• OC-12: SONET service at a rate of 622.08 Mbit/s
• OC-48: SONET service at a rate of 2488.32 Mbit/s
• OC-192: SONET service at a rate of 9.95 Gbit/s
• FE: Ethernet service at a rate of 125 Mbit/s
• GE: Ethernet service at a rate of 1.25 Gbit/s. Supports GE optical signals and GE electrical signals
• 10GE LAN: Ethernet service at a rate of 10.31 Gbit/s
• 10GE WAN: Ethernet service at a rate of 9.95 Gbit/s
• OTU1: OTN service at a rate of 2.67 Gbit/s
• OTU2: OTN service at a rate of 10.71 Gbit/s
• OTU2e: OTN service at a rate of 11.1 Gbit/s
• FC100: SAN service at a rate of 1.06 Gbit/s
• FC200: SAN service at a rate of 2.12 Gbit/s
• FC400: SAN service at a rate of 4.25 Gbit/s
• FC800: SAN service at a rate of 8.5 Gbit/s
• FC1200: SAN service at a rate of 10.51 Gbit/s
• FICON: SAN service at a rate of 1.06 Gbit/s
• FICON Express: SAN service at a rate of 2.12 Gbit/s
• FICON 4G: SAN service at a rate of 4.25 Gbit/s
• FICON 8G: SAN service at a rate of 8.5 Gbit/s
• FICON 10G: SAN service at a rate of 10.51 Gbit/s
• ESCON: SAN service at a rate of 200 Mbit/s
• FDDI: SAN service at a rate of 125 Mbit/s
• SDI: Serial digital interface at a rate of 270 Mbit/s
• HD-SDI: Bit-serial digital interface for high-definition television systems at a rate of 1.49 Gbit/s
• HD-SDIRBR: Bit-serial digital interface for high-definition television systems at a rate of 1.49/1.001 Gbit/s
• 3G-SDI: Video service at a rate of 2.97 Gbit/s
• 3G-SDIRBR: Video service at a rate of 2.97/1.001 Gbit/s
• DVB-ASI: Video service at a rate of 270 Mbit/s

Service mapping mode

• GE service: Supports TTT-GMP/GFP-T mapping.
• 10GE LAN service: Supports Bit Transparent Mapping/MAC Transparent Mapping.

WDM specification

Supports the DWDM specifications.

Tunable wavelength

Supports the optical tunable transponder. Equipped with this module, the board can tune the optical signal output on the WDM side within the range of 80 wavelengths in C-band with the channel spacing of 50 GHz.

FEC coding

• Supports forward error correction (FEC) on the client side when the client-side service type is OTU1 or OTU2(e)
• WDM side: Supports FEC/AFEC-2 coding.

Line modulation format

Supports NRZ.

OTN overhead

• ODUk (k=0, 1, 2, flex) layer: supports PM and TCM overhead processing, and non-intrusive monitoring of PM and TCM overheads.
• OTU2 layer: supports SM overhead processing.

NOTE:

When the board works in transponder mode and ethernet services are accessed, the non-intrusive monitoring of the PM on the WDM side is not supported.

LPT

Supports the LPT function when the client-side service is FE/GE/10GE LAN.

NOTE:

The port equipped with an electrical module does not support LPT.

Intra-board 1+1 protection

Supported

NOTE:

Supports intra-board 1+1 protection when working with optical protection boards.

Client 1+1 protection

Supported

ODUk SNCP

Support intra-board ODUk SNCP.

NOTE:

The encryption function cannot be configured for the port where ODUk SNCP is configured.

Tributary SNCP

Not supported

Optical-layer ASON

Supported

L1 service encryption

Supports setting the encryption function by port.

NOTE:

• When working in ODU1 convergence mode and ODU1_ODU0 mode, the board does not support encryption.
• The encryption function cannot be configured for the port where ODUk SNCP is configured.
• The ODUk SNCP function cannot be configured for the port where encryption function is configured.

ALS

Supports the ALS function on the client side when client services are non-OTN services.

NOTE:

The port equipped with an electrical module does not support ALS.

LLDP

Not Supported

Physical clock

• Supports synchronous Ethernet processing instead of synchronous Ethernet transparent transmission when receiving GE (GFP-T)/10GE LAN(MAC transparent mapping(10.7G)) services on the client side.
• Supports synchronous Ethernet transparent transmission instead of synchronous Ethernet processing when receiving GE (TTT-GMP)/10GE LAN(Bit Transparent Mapping(11.1G)) services on the client side.

NOTE:

The port equipped with an electrical module does not support synchronous Ethernet transparent transmission.

The port equipped with an electrical module does not support synchronous Ethernet processing.

IEEE 1588v2

Supported

NOTE:

• Supports this function when receiving GE (GFP-T) services on the client side.
• Supports this function when receiving 10GE LAN services on the client side and Port Mapping is set to MAC Transparent Mapping (10.7G).
• The port equipped with an electrical module does not support IEEE 1588v2.

ITU-T G.8275.1

Supported

NOTE:

• Supports this function when receiving GE (GFP-T) services on the client side.
• Supports this function when receiving 10GE LAN services on the client side and Port Mapping is set to MAC Transparent Mapping (10.7G).
• The port equipped with an electrical module does not support ITU-T G.8275.1.

ITU-T G.8273.2

Supported

NOTE:

• Supports this function when receiving GE (GFP-T) services on the client side.
• Supports this function when receiving 10GE LAN services on the client side and Port Mapping is set to MAC Transparent Mapping (10.7G).
• The port equipped with an electrical module does not support ITU-T G.8273.2.

Outband DCN

Supports ESC communication.

Test frame

Supported

NOTE:

• When FE services are received on the client side, test frames are supported only in ODU1 convergence mode.
• Supports this function when receiving GE (GFP-T)/10GE LAN (GFP-F) services on the client side.

PRBS

• PRBS signals can be sent from the client-side optical port to the WDM side only when the client-side service type is STM-1/OC–3, STM-4/OC-12, STM-16/OC-48, OTU1, STM-64/OC-192, OTU2, OTU2e.
• PRBS signals can be sent from the client-side optical port to the system side when the board works in muxponder mode.
• Supports the PRBS function on the WDM side.

NOTE:

A maximum of three ports on a TNG1M210D board support PRBS testing.

When working in ODU1_ODU0 mode, the board does not support the PRBS test function in the system direction.

Latency measurement

• Supports PM and TCM latency measurement for upstream higher-order ODU channels.
• Supports PM and TCM latency measurement for upstream lower-order ODU channels when non-OTN services are received on the client side.
• Supports TCM latency measurement for downstream lower-order ODU channels when OTN services are received on the client side.

NOTE:

In a mapping path, the maximum granularity ODUk channel is the higher-order ODU channel, and other ODUk channels are lower-order ODUk channels.

Channel loopback

Supports inloop and outloop

NOTE:

• The channel loopback is supported when the board works in muxponder mode.
• The client-side port supports ODU0 channel loopback only in ODU1_ODU0 mode.
• The line-side port supports ODUk (k = 0, 1, or flex) channel loopbacks.
• The board does not support the channel loopback and ODUk loopback at the same time.

Port loopback

• Supports inloops and outloops on the WDM side.
• Supports inloops and outloops on the client side.
• Supports ODUk inloops and ODUk outloops on the client side.

Alarm and performance event monitoring

• Supports the monitoring of BIP8 bytes (Bursty mode) to help locate line failures.
• Monitors B1 bytes to help locate line failures.
• Supports the monitoring of OTN alarms and performance events.
• Supports the monitoring of the bias current of the laser.
• Supports the monitoring of the temperature of the laser.
• Supports the monitoring of the optical power.
• Supports the remote monitoring (RMON) of Ethernet services.

Basic function

Electrically regenerates optical signals at an electrical REG station.

Regeneration mode

Unidirectional regeneration

Regeneration rate

• OTU2
• OTU2e

WDM specification

Supports the DWDM specifications.

Tunable wavelength

When a wavelength-tunable optical module is configured, WDM-side optical signals are tunable within 80 wavelengths at a 50 GHz channel spacing in C band.

FEC coding

FEC, AFEC-2

OTN overhead

• WDM-side OTU2 layer: supports SM overhead processing.
• ODU2 layer: supports PM and TCM overhead processing.
• ODU2 layer: supports non-intrusive monitoring of PM and TCM overheads.

Optical-layer ASON

Supported

Electrical-layer ASON

Not supported

ALS

Not supported

Outband DCN

Supports ESC communication.

Alarm and performance event monitoring

• Supports the monitoring of BIP8 bytes (Bursty mode) to help locate line failures.
• Monitors OTN alarms and performance events.
• Monitors parameters such as the bias current, temperature, and optical power of the laser.