Huawei OptiX OSN 9800 General Service Processing Board TNG1A212S01 03032NSV

Backplane capacity

• In the 1:1 mode, supports the cross-connection of up to 100 Gbit/s ODUk signals.
• In the 1:3 mode, supports the cross-connection of up to 120 Gbit/s ODUk signals.

Client-side service type

• STM-1: SDH service at a rate of 155.52 Mbit/s
• STM-4: SDH service at a rate of 622.08 Mbit/s
• STM-16: SDH service at a rate of 2488.32 Mbit/s
• STM-64: SDHservice at a rate of 9.95 Gbit/s
• OC-3: SONET service at a rate of 155.52 Mbit/s
• OC-12: SONET service at a rate of 622.08 Mbit/s
• OC-48: SONET service at a rate of 2488.32 Mbit/s
• OC-192: SONET service at a rate of 9.95 Gbit/s
• FE: Ethernet service at a rate of 125 Mbit/s, Supports FE optical signals.
• GE: Ethernet service at a rate of 1.25 Gbit/s, Supports GE optical signals and GE electrical signals.
• 10GE LAN: Ethernet service at a rate of 10.31 Gbit/s
• 10GE WAN: Ethernet service at a rate of 9.95 Gbit/s
• OTU1: OTN service at a rate of 2.67 Gbit/s
• OTU2: OTN service at a rate of 10.71 Gbit/s
• OTU2e: OTN service at a rate of 11.1 Gbit/s
• FC100: SAN service at a rate of 1.06 Gbit/s
• FC200: SAN service at a rate of 2.12 Gbit/s
• FC400: SAN service at a rate of 4.25 Gbit/s
• FICON: SAN service at a rate of 1.06 Gbit/s
• FICON Express: SAN service at a rate of 2.12 Gbit/s
• FICON 4G: SAN service at a rate of 4.25 Gbit/s
• FC800: SAN service at a rate of 8.5 Gbit/s
• FICON 8G: SAN service at a rate of 8.5 Gbit/s
• FICON 10G: SAN service at a rate of 10.51 Gbit/s
• FC1200: SAN service at a rate of 10.51 Gbit/s
• FC1600: SAN service at a rate of 14.025 Gbit/s
• ESCON: SAN service at a rate of 200 Mbit/s
• FDDI: SAN service at a rate of 125 Mbit/s
• SDI: Serial digital interface at a rate of 270 Mbit/s
• HD-SDI: Bit-serial digital interface for high-definition television systems at a rate of 1.49 Gbit/s
• HD-SDIRBR: Bit-serial digital interface for high-definition television systems at a rate of 1.49/1.001 Gbit/s
• 3G-SDI: Video service at a rate of 2.97 Gbit/s
• 3G-SDIRBR: Video service at a rate of 2.97/1.001 Gbit/s
• DVB-ASI: Video service at a rate of 270 Mbit/s

Service mapping mode

• Supports encapsulating 10GE LAN services into bit transparent mapping (11.1G) or MAC transparent mapping (10.7G) services.
• Supports encapsulation of GE services in GE(GFP-T) or GE(TTT-GMP).

FEC coding

Supports ITU-T G.709-compliant forward error correction (FEC) on the client side when the client-side service type is OTU1 or OTU2(e).

OTN overhead

• ODU0/ODU1/ODU2 layer: supports PM and TCM overhead processing, and non-intrusive monitoring of PM and TCM overheads.
• OTU1/OTU2 layer: supports SM overhead processing.
• ODUflex layer: supports PM overhead processing.

Maximum frame length for a port

1518 to 9600 Bytes, supports a jumbo frame with a maximum length of 9600 bytes.

LPT

Supported on the client side when FE/GE/10GE LAN services are received.

NOTE:

The port equipped with an electrical module does not support LPT.

Client 1+1 protection

Supported

ODUk SNCP

Supported

Tributary SNCP

Supported

NOTE:

The board supports tributary SNCP protection only when the client-side service type is OTN, SDH, SONET or 10G WAN.

Electrical-layer ASON

Supported

L1 service encryption

Supported

NOTE:

When working in ODU1 convergence mode and ODU1_ODU0 mode, the board does not support encryption.

ALS

Supported on the client side when non-OTN services are received.

NOTE:

The port equipped with an electrical module does not support ALS.

LLDP

Not Supported

Physical clock

• When receiving GE(GFP-T)/10GE LAN(MAC transparent mapping(10.7G)) services on the client side, the board can support synchronous Ethernet processing.
• When receiving GE(GFP-T)/10GE LAN(Bit Transparent Mapping(11.1G)) services on the client side, the board can support synchronous Ethernet transparent transmission.

NOTE:

The port equipped with an electrical module does not support synchronous Ethernet transparent transmission or synchronous Ethernet processing.

IEEE 1588v2

Supported

NOTE:

• Supports this function when receiving GE (GFP-T) services on the client side. Supports this function when receiving 10GE LAN services on the client side and Port Mapping is set to MAC Transparent Mapping (10.7G).
• The port equipped with an electrical module does not support IEEE 1588v2.

ITU-T G.8275.1

Supported

NOTE:

• The board supports the BC modes when the client-side service type is GE(GFP-T) or 10GE LAN with the MAC Transparent Mapping (10.7 G).
• The port equipped with an electrical module does not support ITU-T G.8275.1.

ITU-T G.8273.2

Supported

Outband DCN

Supported communication over ESCs when the client-side service type is OTU1/OTU2/OTU2e.

Test frame

Support test frames when receiving FE/GE (GFP-T)/10GE LAN(MAC transparent mapping(10.7G)) services on the client side.

NOTE:

Supports this function only in ODU1 convergence mode when receiving FE services on the client side.

PRBS

Support the PRBS test function on the client side only when receiving STM-1/OC–3, STM-4/OC-12, STM-16/OC-48, STM-64/OC-192, OTU2, OU2e or OTU1 services.

NOTE:

A maximum of three ports on a TNG1A212 board support PRBS testing. When working in ODU1_ODU0 mode, the board does not support the PRBS test function in the backplane direction.

Latency measurement

• When non-OTN services are received on the client side of the board, the PM section latency measurement is supported in the backplane direction (upstream direction).
• When OTN services are received on the client side of the board, the TCM section latency measurement is supported in the optical port direction (downstream direction).

Channel loopback

Supports inloops and outloops on channels.

NOTE:

ODU0 channel loopbacks are supported only when the port working mode is the ODU1_ODU0 mode (OTU1->ODU1->ODU0).

Port loopback

• Supports inloops and outloops on the client side.
• Supports ODUk inloops and ODUk outloops on the client side.

NOTE:

• The board supports ODUk inloop and ODUk outloop only when non-OTN services are received, the port working mode is non-convergence, and bidirectional cross-connections are configured.
• When the service type is set to None, Inloop, Outloop, and ODUk Outloop are not supported.
• When non-OTN services are received, the PRBS in the backplane direction can be used only with ODUk loopback.

Alarm and performance event monitoring

• Supports the monitoring of BIP8 bytes (Bursty mode) to help locate line faults.
• Supports the monitoring of B1 bytes to help locate line faults.
• Supports the monitoring of OTN alarms and performance events.
• Supports the monitoring of the laser bias current.
• Supports the laser temperature monitoring.
• Supports the optical power monitoring.
• Supports the remote monitoring (RMON) of Ethernet services.