Huawei NE40E LPUI-402 4 Port 100G Integrated Line Processing Board CR5D0E4NBA70 03059122

Functions and Features

Description

Basic function

Supports 400G line-rate forwarding.

Reliability and availability

Hot swappable.

Restrictions and remarks

1. Each interface supports the 100GE/50GE/40GE/4x10GE breakout modes. The default mode is 100GE. You can run the port split command to switch the interface mode to 100GE/50GE/40GE/4x10GE breakout mode.

2. Due to software limitations, all interfaces cannot be automatically adaptive to 40G.

3. When the board works with the 02312NCX optical module, the long-term working temperature of the optical module ranges from 0°C to 45°C.

4. Interfaces 0 to 3 support FlexE.

5. Ports on the panel can be grouped as follows: {0, 1}, {2, 3}

FlexE interfaces of the same rate in the same group can be bundled through configuration. For example, every two 100G interfaces can be bundled into a group through FlexE, and the maximum rate of the FlexE service interface in this group can be set to 200 Gbps.

Breakout supported

Yes.

To enable the breakout function on a port, run the port split command.

Interface rate auto-sensing supported

No

FlexE supported

Yes

Physical ports 0 and 1 can be added to the same group. port-id ranges from 4 to 23 and 1000 to 3000. A maximum of 20 FlexE clients can be created.

Physical ports 2 and 3 can be added to the same group. port-id ranges from 24 to 43 and from 1000 to 3000. A maximum of 20 FlexE clients can be created.