TN52ND2 Is 2 Port 10G line service processing board
Huawei OSN 8800 OTN Line Board TN52ND2 Overview
ND2: 2 x 10G line service processing board
The available functional versions of the ND2 board are TN11, TN12, TN52, and TN53.
As a type of line board, the TN52ND2 board converts 16 ODU0, eight ODU1, four ODUflex, or two ODU2 into two ITU-T G.694.1 OTU2 signals or converts two ODU2e signals into two ITU-T G.694.1 OTU2e signals. The board supports hybrid transmission of the ODU0 service, ODU1 service, ODUflex service and the ODU2/ODU2e service.
The ND2 board is mainly used to achieve cross-connection at the electrical layer, and to provide OTN interfaces and ESC.
The ND2 board consists of the WDM-side optical module, signal processing module, control and communication module, and power supply module.
There are indicators and interfaces on the front panel of the ND2 board.
One slot houses one ND2 board.
The ND2 board is mainly used to achieve cross-connection at the electrical layer, and to provide OTN interfaces and ESC.
Functions and Features Of The ND2 Board
Function and feature |
Description |
Basic function |
The ND2 board converts signals as follows:
Supports hybrid transmission of the ODU0 signals, ODU1 signals , ODUflex signals and the ODU2/ODU2e signals. |
Cross-connect capabilities |
Supports cross-connections with cross-connect boards.
|
OTN function |
NOTE: Only the TN52ND2T04/TN53ND2 supports TCM and TCM non-intrusive monitoring for ODU0. |
WDM specification |
Supports ITU-T G.694.1-compliant DWDM specifications. |
Tunable wavelength function |
Supports tunable wavelength optical modules that provide for:
|
ESC function |
Supported |
PRBS function |
Supports the PRBS function on the WDM side. NOTE: If the TN52ND2T04/TN53ND2 board interconnects with another line board, PRBS must be enabled for the TN52ND2T04/TN53ND2 board and the connected line board. In addition, the PRBS function can take effect on the boards only when the following condition is met: The TN52ND2T04/TN53ND2 board works in standard mode and ODU0, ODU1, or ODUflex cross-connections are configured for the TN52ND2T04/TN53ND2 board, or the TN52ND2T04/TN53ND2 board works in compatible mode but no cross-connection is configured for it. |
LPT function |
Not supported |
FEC coding |
TN11ND2:
TN12ND2/TN52ND2/TN53ND2:
NOTE: Boards that use different FEC modes cannot interconnect with each other. |
Alarm and performance event monitoring |
|
Regeneration board |
|
ALS function |
Not supported |
Test frame |
Not supported |
IEEE 1588v2 |
The TN12ND2/TN52ND2T01/TN52ND2T02/TN53ND2 board supports the BC and OC modes; it does not support the TC or TC+OC mode. |
Physical clock |
The TN12ND2 board supports this feature only when ODU1 signals are cross-connected from the backplane. The TN52ND2T01/TN52ND2T02 board supports this feature only when ODU0 or ODU1 signals are cross-connected from the backplane. The TN53ND2 board supports this feature only when ODU0, ODU1, ODUflex signals are cross-connected from the backplane. |
Optical-layer ASON |
Supported |
Electrical-layer ASON |
Supported by the TN11ND2/TN12ND2/TN52ND2/TN53ND2 |
Protection scheme |
NOTE: When the cross-connect granularity is ODUflex, the board does not support tributary SNCP protection and ODUk SPRing protection. |