SL93EM6X,EM6X Is Huawei OTN 6-Port Ethernet Processing Board
The EM6X board is a 6-port Ethernet processing board. It provides three 10GE optical ports, one GE optical port, and two GE fixed electrical ports. Its functional versions are SL93EM6X VER.C and SL93EM6X VER.D.
EM6X boards receive and transmit Ethernet services or carry MPLS tunnels.
To implement Ethernet service functions, the EM6X needs to work with the packet switching unit of the system control, switching, and timing board.
Function and Feature
Function and Feature |
Description |
|
---|---|---|
Basic functions |
Receives/Transmits Ethernet service signals, and works with the packet switching unit to process the Ethernet service signals. |
|
Port specifications |
Unpluggable GE electrical port |
Two |
GE port |
One port that supports the following SFP+/SFP optical module types:
|
|
10GE port |
Three ports that support the following SFP+/SFP module types:
|
|
Backplane bus bandwidth |
10 Gbit/s when working with the CSHLU |
|
Forwarding mode |
Centralized mode NOTE: When a board works in centralized mode, all Ethernet services carried on the board must be forwarded by the packet switching unit of the cooperating system control board. |
|
Port attributes |
Working mode |
|
TAG attribute |
|
|
Jumbo frame |
Supports a maximum frame length of 9600 bytes. |
|
Traffic control |
Supports responding to the received Pause frames. |
|
Services |
Native ETH service |
|
ETH PWE3 service |
|
|
LAG |
Supports intra-board LAG and inter-board LAG. |
|
LLDP |
Supported |
|
ERPS |
Supported |
|
LPT |
Supported |
|
MSTP |
Supported |
|
QoS |
DiffServ |
Supports simple traffic classification by PHB that is specified based on QoS information carried in packets (including the C-VLAN priority, S-VLAN priority, DSCP value, and MPLS EXP value). |
Complex traffic classification |
Supports traffic classification at Ethernet ports by:
|
|
CAR |
Supports CAR for service flows at ports. |
|
Queue scheduling policy |
|
|
Congestion avoidance |
Supports packet dropping in tail drop mode or WRED mode. |
|
Traffic shaping |
Supports shaping for a specific port, priority queue, or service flow, and allows the PIR and CIR to be specified in steps of 64 kbit/s. |
|
ETH OAM |
Ethernet service OAM |
Supports ETH OAM functions that comply with IEEE 802.1ag. |
Ethernet port OAM |
Supports ETH OAM functions that comply with IEEE 802.3ah. |
|
RMON |
Supported |
|
Clock |
Physical layer synchronization |
Synchronous Ethernet |
Physical-layer clock protection |
|
|
Packet time synchronization |
|
|
Packet frequency synchronization |
|
|
DCN |
Inband DCN |
Provides one inband DCN channel over each port. |
O&M |
Loopback |
|
Warm reset and cold reset |
Supported |
|
Query of board manufacturing information |
Supported |
|
Query of board power consumption |
Supported |
|
Board voltage monitoring |
Supported |
|
Board temperature monitoring |
Supported |
|
Query of SFP module information |
Supported |