Huawei OptiX RTN 980 IDU Board EMS6 SL91EMS6

Function and Feature

Description

Basic functions

Receives/Transmits four channels of FE signals, two channels of GE signals, and one channel of GE packet plane signals, and performs EoSDH processing.

Port specifications

FE electrical port

Provides four 10/100BASE-T(X) ports.

GE port

Provides two ports that support the following SFP modules:

1. 1000Base-SX
2. 1000Base-LX
3. 1000Base-VX
4. 1000Base-ZX
5. 10/100/1000BASE-T(X)

Port attributes

Working mode

1. FE ports support 10M/100M full-duplex and auto-negotiation.
2. GE electrical ports support 10M half-duplex/full-duplex, 100M half-duplex/full-duplex, 1000M full-duplex, and auto-negotiation.
3. GE optical ports support 1000M full-duplex and auto-negotiation.

TAG attribute

1. Supports setting and query of the TAG attribute of an Ethernet port.
2. Supports three TAG attributes: Tag Aware, Access, and Hybrid.

Jumbo frame

Supports a maximum frame length of 9600 bytes.

Traffic control

Supports port-based traffic control in compliance with IEEE 802.3x.

Service type

EPL

Supports the EPL services based on ports.

EVPL

1. Supports EVPL services based on VLAN.
2. Supports EVPL services based on QinQ.

EPLAN

Supports EPLAN services based on IEEE 802.1d bridges.

EVPLAN

1. Supports EVPLAN services based on IEEE 802.1q bridges.
2. Supports EVPLAN services based on IEEE 802.1ad bridges.

Encapsulation and mapping

Encapsulation format

1. GFP
2. HDLC
3. LAPS

Maximum TDM service capacity supported by the backplane

4xVC-4

VCTRUNK level

VC-12/VC-12 VX/VC-3/VC-3 VX

Maximum number of VCTRUNKs supported by the board

8

Maximum bandwidth supported by each VCTRUNK

1. VCTRUNK1 to VCTRUNK7: 100 Mbit/s
2. VCTRUNK8: 622 Mbit/s

LCAS

Supported

LAG

Inter-board LAG

Not supported

Intra-board LAG

Supported

NOTE:

Port 7 (bridging port) on the EMS6 does not support intra-board LAG.

ERPS

Supported and in compliance with ITU-T G.8032 v1

Spanning tree protocol

Supports the STP and RSTP, which comply with IEEE 802.1w.

IGMP Snooping

Supported

LPTa

Supported

NOTE:

Port 7 (bridging port) on the EMS6 does not support LPT.

QoS

Traffic classification

1. Traffic classification by ports
2. Traffic classification by port+C-VLAN ID
3. Traffic classification by port+S-VLAN ID
4. Traffic classification by port+C-VLAN ID+S-VLAN ID

CoS

Grooms packets in traffic flows to eight egress queues of different CoSs in the following modes:

1. Simple
2. VLAN priority
3. IP TOS value
4. DSCP value

CAR

Supports CAR for service flows.

Shaping

Supports traffic shaping for a specific port or egress queue.

Queue scheduling policy

1. SP
2. WRR
3. SP+WRR

Ethernet OAM

1. Supports ETH OAM functions that comply with IEEE 802.1ag.
2. Supports ETH OAM functions that comply with IEEE 802.3ah.

NOTE:

Port 7 (bridging port) on the EMS6 does not support ETH-OAM functions that comply with IEEE 802.3ah.

RMON

Supported

Port mirroring

Supported

Clock

Clock source

Synchronous Ethernet

NOTE:

Ports 7 and 8 (bridging ports) on the EMS6 do not support synchronous Ethernet.

Clock protection

1. Protection based on clock source priorities
2. Protection based on the SSM protocol
3. Protection based on the extended SSM protocol

Check for MAC address flapping

Supported

O&M

Loopback

1. Supports PHY-layer inloops at Ethernet ports excluding ports 7 and 8 (bridging ports).
2. Supports MAC-layer inloops at Ethernet ports excluding port 8 (bridging port).
3. Supports inloops on VC-3 paths.

Traffic monitoring

Supported

Warm reset and cold reset

Supported

Query of board manufacturing information

Supported

Query of board power consumption

Supported

Board temperature monitoring

Supported