Huawei OptiX RTN 980L IDU Boards SL91CQ1 Is 4xSTM-1 Channelized Interface Board
The functional version of CQ1 boards is SL91.
CQ1 boards apply to OptiX RTN 980L NEs to transparently transmit STM-1 services over Packet microwave networks. CQ1 boards receive/transmit only channelized STM-1 services.
A CQ1 board receives and transmits four channels of channelized STM-1 optical/electrical signals.
This section describes how the functional units of a CQ1 board process channelized STM-1 optical signals.
A CQ1 board has indicators and STM-1 ports on its front panel.
The CSHL can be inserted in slots 15 and 20. On the NMS, the CSHL is divided into three logical boards by function and each logical board has a logical slot.
The CQ1 board can be inserted in Slots 1 to 14, which have consistent logical slot numbers on the NMS.
STM-1 ports on CQ1 boards support multiple types of SFP modules.
This section describes the technical specifications of the CQ1, including STM-1 optical/electrical port specifications, mechanical specifications, and power consumption.
Functions and Features
Function and Feature |
Description |
|
---|---|---|
Basic functions |
Receives and transmits four channels of channelized STM-1 optical/electrical signals. |
|
Supported packet service types |
|
|
Port specifications |
Optical ports |
|
Electrical ports |
|
|
Fractional E1 |
Supports transparent CES transmission at the rate of 64 kbit/s. |
|
CES |
Number of services |
252 |
Encapsulation mode |
|
|
Idle timeslot compression |
Supported only in CESoPSN mode |
|
Jitter compensation buffering time (µs) |
875 to 16000 |
|
Packet loading time (µs) |
125 to 5000 |
|
CES ACR |
Supported with the NE functioning only as a master node |
|
Transparent transmission of SDH overheads |
Supported |
|
MLPPP |
MLPPP link type |
E1s in channelized STM-1s |
Maximum number of PPP links |
252 |
|
Maximum number of MLPPP groups |
32 |
|
Maximum number of links in an MLPPP group |
16 |
|
Clock |
Clock source |
|
Clock protection |
|
|
SDH line clock retiming |
Supported |
|
LMSP |
1:1 LMSP |
|
DCN |
Outband DCN |
Provides one 3-byte, 9-byte, or 12-byte DCC over each SDH line port. |
Inband DCN |
Supports transmission of DCN information using part of bandwidth provided by MLPPP links. |
|
O&M |
Loopback |
|
Warm reset and cold reset |
Supported |
|
Turning on/off a laser |
Supported |
|
PRBS test |
Not supported |
|
Query of board manufacturing information |
Supported |
|
Query of board power consumption |
Supported |
|
Detection and query of SFP module information |
Supported |