ISR4431/K9 Is Cisco 4431 Integrated Services Router(4GE,3NIM,8GB Flash,4GB DRAM)
The Cisco 4000 Series Integrated Services Routers provide routing, hosting, security, switching, and application visibility—all in a single, trustworthy platform. Build your digital branch to be secure, fast, and scalable. Quickly adopt advanced technologies—such as Catalyst SD-WAN, enhanced application visibility, and edge computing—while meeting the heavy network-performance demands driven by cloud applications and digital transformation.
The Cisco 4000 Family Integrated Services Router (ISR) revolutionizes WAN communications in the enterprise branch. With new levels of built-in intelligent network capabilities and convergence, it specifically addresses the growing need for application-aware networking in distributed enterprise sites. These locations tend to have lean IT resources. But they often also have a growing need for direct communication with both private data centers and public clouds across diverse links, including Multiprotocol Label Switching (MPLS) VPNs and the Internet.
Cisco 4000 Family ISRs provide you with Cisco® Software Defined WAN (SDWAN) software features and a converged branch infrastructure. Along with superior throughput, these capabilities form the building blocks of next-generation branch-office WAN solutions.
Cisco ISR 4000 Router ISR4431/K9 Specification
Aggregate Throughput |
1.5Gbps |
Total onboard WAN or LAN 10/100/1000 ports |
4 |
Total onboard WAN or LAN 10Gbps ports |
2 |
RJ-45-based ports |
4 |
SFP-based ports |
4 |
Enhanced service-module slots |
3 |
Doublewide service-module slots |
2 |
NIM slots |
3 |
OIR (all I/O modules) |
Yes |
Onboard ISC slot |
1 |
Default memory double-data-rate 3 (DDR3) error-correction-code (ECC) DRAM (Combined control/services/data planes) |
NA |
Maximum memory DDR3 ECC DRAM (Combined control/services/data planes) |
NA |
Default memory DDR3 ECC DRAM (data plane) |
4 GB |
Maximum memory DDR3 ECC DRAM (data plane) |
4 GB |
Default memory DDR3 ECC DRAM (control/services plane) |
8 GB |
Maximum memory DDR3 ECC DRAM (control/services plane) |
32 GB |
Default flash memory |
8 GB |
Maximum flash memory |
32 GB |
External USB 2.0 slots (type A) |
2 |
USB console port -type B mini (up to 115.2 kbps) |
1 |
Serial console port - RJ45 (up to 115.2 kbps) |
1 |
Serial auxiliary port - RJ45 (up to 115.2 kbps) |
1 |
Power-supply options |
Internal: AC, DC and PoE |
Redundant power supply |
Internal: AC, DC and PoE |
Power Specifications |
|
AC input voltage |
100 to 240 VAC auto ranging |
AC input frequency |
47 to 63 Hz |
AC input current range, AC power supply (maximum) |
7.1 to 3.0A |
AC input surge current |
60 A peak and less than 5 Arms per half cycle |
Typical power (no modules) (watts) |
- |
Maximum power with AC power supply (watts) |
1000W (no PoE) |
Maximum power with PoE power supply (platform only) (watts) |
1000 with PoE redundant 1450 with PoE boost no redundancy |
Maximum endpoint PoE power available from PoE power supply (watts) |
500 W with optional redundancy |
Maximum endpoint PoE power capacity with PoE boost (watts) |
950 W no redundancy |
Sizes and Weights |
|
Dimensions |
3.5 x 17.25 x 18.5 in 88.9 x 438.15 x 469.9 mm) |
External Power Supply Dimensions (H x W x D) |
N/A |
Rack height |
2 Rack Units (2RU) |
Rack-mount 19in. (48.3 cm) EIA |
Included |
Rack-mount 23in. (58.4 cm) EIA |
Optional |
Wall-mount |
No |
Weight with 1, 450-WAC power supply (no modules) |
- |
Weight with 1 1,000-WAC power supply+ 1 PoE power module (no other modules) |
- |
Weight with AC PS (no modules) |
- |
Weight with AC PS with POE (no modules) |
- |
Typical weight (fully loaded with modules) |
- |
Airflow |
I/O side to bezel side |
MTBF (Hours) |
480770 |
Environmental Specifications |
|
Operating Conditions |
|
Temperature |
32 to 104ºF (0 to 40ºC) |
Altitude (China) |
0 – 6,560 ft. (0 – 2,000 m) |
Altitude (Rest of the world) |
0 – 10,000 ft. (0 – 3,050 m) |
Relative humidity |
5% to 85% |
Short-term humidity |
5% to 90%, not to exceed 0.024 kg water/kg of dry air |
Acoustics: Sound pressure (Typical/maximum) |
50.6/73.1 dBA |
Acoustics: Sound power (Typical/maximum) |
58.2/78.8 dBA |
Nonoperating Conditions |
|
Temperature |
-40 to 158ºF (-40 to 70ºC) |
Relative humidity |
5% to 95% |
Altitude |
15,584 ft (4750m) |
Regulatory and Compliance |
|
Safety |
UL 60950-1 CAN/CSA C22.2 No. 60950-1 EN 60950-1 AS/NZS 60950-1 IEC 60950-1 |
EMC |
47 CFR, Part 15 ICES-003 Class A EN55032 Class A CISPR32 Class A AS/NZS CISPR 32 Class A VCCI V-3 CNS 13438 EN 300-386 EN 61000 (Immunity) EN 55024, CISPR 24 KN22, KN24 |
Telecom |
T1 IC CS-03:2004 TIA-968-B:2009 HKTA 2028:2010 HKTA 2017:2010 HKTA 2015: 2006 G.703:2001 ID0002:2007 IS6100:2004 DSPR Gray Book:2000 DSPR Technical Condition: 2004 E1 AS/ACIF S016: 2001 AS/ACIF S038: 2001 G.703:2001 TBR 4:1995 TBR 12:1993 TBR 13:1996 RRA 2009-38 (RRL 2005-96) IDA TS DLCN:2011 IDA TS ISDN PRA:2005 IS6100: 2004 PTC 220:2008 Ethernet IEEE 802.3 ANSA X3.263 |
Cisco IOS XE Software |
|
Protocols |
IPv4, IPv6, static routes, Routing Information Protocol Versions 1 and 2 (RIP and RIPv2), Open Shortest Path First (OSPF), Enhanced Interior Gateway Routing Protocol (EIGRP), Border Gateway Protocol (BGP), BGP Router Reflector, Intermediate System-to-Intermediate System (IS-IS), Multicast Internet Group Management Protocol Version 3 (IGMPv3), Protocol Independent Multicast sparse mode (PIM SM), PIM Source-Specific Multicast (SSM), Resource Reservation Protocol (RSVP), Cisco Discovery Protocol, Encapsulated Remote Switched Port Analyzer (ERSPAN), Cisco IOS IP Service-Level Agreements (IPSLA), Call Home, Cisco IOS Embedded Event Manager (EEM), Internet Key Exchange (IKE), access control lists (ACL), Ethernet Virtual Connections (EVC), Dynamic Host Configuration Protocol (DHCP), Frame Relay (FR), DNS, Locator ID Separation Protocol (LISP), Overlay Transport Virtualization (OTV), Hot Standby Router Protocol (HSRP), RADIUS, authentication, authorization, and accounting (AAA), Application Visibility and Control (AVC), Distance Vector Multicast Routing Protocol (DVMRP), IPv4-to-IPv6 Multicast, MPLS, Layer 2 and Layer 3 VPN, IPsec, Layer 2 Tunneling Protocol Version 3 (L2TPv3), Bidirectional Forwarding Detection (BFD), IEEE 802.1ag, and IEEE 802.3ah |
Encapsulations |
Generic routing encapsulation (GRE), Ethernet, 802.1q VLAN, Point-to-Point Protocol (PPP), Multilink Point-to-Point Protocol (MLPPP), Frame Relay, Multilink Frame Relay (MLFR) (FR.15 and FR.16), High-Level Data Link Control (HDLC), Serial (RS-232, RS-449, X.21, V.35, and EIA-530), and PPP over Ethernet (PPPoE) |
Traffic management |
QoS, Class-Based Weighted Fair Queuing (CBWFQ), Weighted Random Early Detection (WRED), Hierarchical QoS, Policy-Based Routing (PBR), Performance Routing (PfR), and Network-Based Application Recognition (NBAR) |
Cisco Software Defined WAN
Cisco SDWAN is a set of intelligent software services that allow you to reliably and securely connect users, devices, and branch office locations across a diverse set of WAN transport links. SDWAN-enabled routers like the ISR 4000 dynamically route traffic across the “best” link based on up-to-the-minute application and network conditions for great application experiences. You get tight control over application performance, bandwidth usage, data privacy, and availability of your WAN links - control that you need as your branches conduct greater volumes of mission-critical business.
Cisco ISR 4000 Router ISR4431/K9
The Cisco 4000 Series ISRs consolidate many must-have IT functions, including network, compute, and storage resources. The high-performance, integrated routers run multiple concurrent services, including encryption, traffic management, and WAN optimization, without slowing your data throughput. And you can activate new services on demand through a simple licensing change.
The last few years has seen a rapid transformation and adoption of digital technologies. This puts pressure on the on the Network teams supporting this changing infrastructure - especially when provisioning, managing, monitoring and troubleshooting these diverse devices. Additionally innovations such as Software Defined WAN (SDWAN), Network Function Virtualization (NFV), Open APIs and Cloud Management show great promise in transforming Organizations IT networks. This transformation raises further questions and challenges for the IT teams.
The Cisco Digital Network Architecture (Cisco DNA) is an open, extensible, software-driven architecture that provides for faster innovation, helping to generate deeper insights, and deliver exceptional experiences across many different applications. Cisco DNA relies on intent-based networking, a revolutionary approach in networking that helps organizations automate, simplify, and secure the network.
Cisco 4000 Family ISRs provide you with Cisco Software Defined WAN (SDWAN) software features and a converged branch infrastructure. Along with superior throughput, these capabilities form the building blocks of next-generation branch-office WAN solutions.®
The cards are described in Table 1.
Table 1. Cisco T1/E1 Network Interface Modules
NIM-1MFT-T1/E1 |
1-port multi-flex trunk voice/clear-channel data T1/E1 module |
NIM-2MFT-T1/E1 |
2-port multi-flex trunk voice/clear-channel data T1/E1 module |
NIM-4MFT-T1/E1 |
4-port multi-flex trunk voice/clear-channel data T1/E1 module |
NIM-8MFT-T1/E1 |
8-port multi-flex trunk voice/clear-channel data T1/E1 module |
NIM-1CE1T1-PRI |
1-port multi-flex trunk voice/channelized data T1/E1 module |
NIM-2CE1T1-PRI |
2-port multi-flex trunk voice/channelized data T1/E1 module |
NIM-8CE1T1-PRI |
8-port multi-flex trunk voice/channelized data T1/E1 module |
Table 2 lists the NIMs supported.
Table 2. NIMs Supported on Cisco 4000 Series ISR4431 Platforms
Platform |
Number of NIMs |
Support for NIMs |
|||
1-Port NIM |
2-Port NIM |
4-Port NIM |
8-Port NIM |
||
Cisco 4451 |
5 |
Yes |
Yes |
Yes |
Yes |
Cisco 4431 |
3 |
Yes |
Yes |
Yes |
Yes |
Cisco 4351 |
5 |
Yes |
Yes |
Yes |
Yes |
Cisco 4331 |
3 |
Yes |
Yes |
Yes |
No |
Cisco 4321 |
2 |
Yes |
Yes |
Yes |
No |
The modules are supported with Cisco IOS XE Software Release 3.9.1 on Cisco 4431/K9 ISRs, and the rest of the platforms are supported with Cisco IOS XE Software Release 3.13.1.
Data applications require a minimum of the IP Base Technology package, and voice applications require a minimum of the Unified Communications Technology package.
No, all ports can support T1 and E1, but all ports must be of the same type on the same card.